GMC Motorhome Custom Products

GMC BELT TENSIONERS

2011-11-30T06:53:00.000-08:00

LINK TO TOOLS

http://www.bdub.net/bovee/

BURP HOSE

2011-06-23T05:13:00.000-07:00

THIS IS A NEW PRODUCT FROM

BERT AND FAY

http://www.bdub.net/curtis-unlimited/index.html

It is the smaller line in the picture - not the corregated blue and white hose

We had a problem with this hose cracking and leaking after it was replaced
and was only one year old. Left a nice puddle at the gas station. And when
it leaks, it is very close to the headers. So we ended up replacing it with
a steel line joined with top quality short rubber fuel injection hoses.

Since then, we have added this steel line to the list of products we supply
and it has the bubble ends necessary to retain the rubber hoses.

Selling price is currently

$25.00.

If one wants to make their own, the bubble ends can be produced with a
special aircraft tool (which translates into expensive tool at new price).
Think we bought it from Spencer Aircraft many years ago.

Definitely replace and/or keep a good eye on this line if you are still
running rubber!

Bert and Fay Curtis

There will be more pictures in the future,

GMC WESTERN STATES RALLY

2011-04-19T21:54:00.000-07:00

THE VENDORS RALLY

http://www.gmcws.org/

SCHEDUAL AND INFO

http://www.gmcws.org/events.htm

Applied GMC - Our vendors-R-Us

2011-04-19T03:00:00.000-07:00

Applied GMC

GMC Motorhome Parts & Service

1-800-752-7502

7:30 a.m. - 5:00 p.m. Pacific Time

http://www.appliedgmc.com/

Just down the road from the rally

Get a copy of their great catalog

Order your parts ( delivered to the Rally)

Make an appointment for service

KING CITY - GMC VINYLS AND MEMORABILIA

2011-03-31T02:14:00.000-07:00

GMC VINYLS AND MEMORABILIA

(while you wait, or better, place an order here)
http://www.dldesignstore.com
Terry Taylor

http://www.dldesignstore.com/

AMAZING NEW GMC VENDOR / PRODUCTS

2011-03-30T06:56:00.000-07:00

JUST AMAZING NEW PRODUCTS

http://www.bdub.net/jhupy/

FROM JIM HUPY

1754 82nd Ave SE
Salem, OR 97317

jamesh1296 @ gmail.com

GM steel wheels- Hub extenders

The Hub extenders that I make to facilitate the use of 16" GM steel wheels from a 1 Ton GMC or Chev Truck before they went to metric specs. Don't know the exact years but in the late 90's for sure.

When you use these wheels on our GMC's and you are using the bigger calipers or even in some cases when the rotors are new with the stock calipers and thick ceramic pads, the calipers will drag on the inside of the wheel. The spacers move the wheel outboard, and the Hub extenders move the hub centering feature out and center the steel wheels with the hub. They carry no load to speak of, their purpose is to center the wheel. The studs and nuts clamp the wheel, spacer and hub together as a very sturdy unit.

Pressure Bleeder

Master Cylinder Cover

http://www.bdub.net/jhupy/

AND

MUCH, MUCH, MORE

http://goo.gl/m8OU0

A NEW --- KING CITY -- VENDOR,-- MINNIE

2011-03-28T01:45:00.000-07:00

SOME FUN THINGS FOR YOUR GMC

WOODEN SIGNS - AND OTHER THINGS

COME SEE WHAT ELSE THEY MAKE

http://www.minniebiz.com/

GMC PRODUCTS BY GEORGE BANOVICH (49er)

2011-03-22T20:20:00.000-07:00

GMC TIRE TABLE

WHEEL TABLE $49.95 PLUS FREIGHT

GMC AWNING SUPPORT

AWNING SUPPORT $9.95 PLUS FREIGHT

save freight costs by picking these items up at the GMCWS rally.

George Banovich

gjbanovich@aol.com

925.600.7598

GMC JACK PAD -- FOR THE FRONT

2010-04-14T06:41:00.000-07:00

GMC FRONT JACK PAD BY TERRY SKINNER

CONTACT TERRY FOR COST AND DELIVERY
gmcnut@gmail.com

here is a link on how to use this pad

http://www.gmcmhphotos.com/photos/showphoto.php?photo=33075

diesel1

2010-03-14T05:04:00.001-07:00

Applied GMC Puller

2008-08-10T08:56:00.000-07:00

The complete kit w/o the seal tool is $450.

If you desire the seal tools they are $60 for the two seal tools. ( one is to install with the knuckle off the coach and the other is for installing it on the coach.

http://gmcmotorhome.info/list.html#front

GMC TOOLS FROM TONY LAMMI

2007-08-24T04:56:00.000-07:00

GMC TOOLS BY TONY LAMMI

email - tslamm@aceweb.com

These tools are hand made one at a time.

I will post Tony's other contact information when it is available.

Torsion bar unloader

have three left, can make more. $80.00

Boogie greaser set

Head machined from 3/4" brass hexagon stock. Have2 sets left. can make more

Front wheel bearing puller

Bearing puller assembled

This is all I have. This alone can be used to remove the bearings if you have an open frame press. These require alloyed steel and with the other parts, ( splined nuts,threaded rod, and such) would require quite a bit of time to make.$250.00 + ?

Engine lift trolley

Rides on 2" square tube, 1/4" wall thickness.Very compact. Makes it possible to lift the engine high enough to clear the deck by use of a lifting plate bolted to the threaded holes for the carburetor. This is the only one I have. If sufficient interest can make more, $85.00 ?

ONAN GENERATOR TROUBLE DIAGNOSIS

2006-10-04T08:23:00.000-07:00

http://video.google.com/videoplay?docid=8458795385268446708&hl=en

This is a video that shows how and where to adjust the Onan Generator

In our GMC Classic Motor Homes

This is an example of the excellent DVD available with all of the Dealer Training Tapes

Thanks to the excellent work of Tom Lins

You can order your very own sets of DVDs here

http://www.bdub.net/tomlins/

Ken Thoma Video

2006-06-08T08:02:00.000-07:00

Dedicated to the Memory of Ken Thoma.

No matter what bearing puller you use, you should look at this video to see all the steps live on how to service the GMC Bearings.

Thanks to Bdub, you can run the video here

http://video.google.com/videoplay?docid=9107037595711370681

Look for all sorts of neat tips

See his bearing greaser

How do you test the bearing spacing ?

If you want to see more of Ken's bearing puller, here is a step by step article

http://www.gmcmotorhome.com/tech/front_bearings/index.html

Watch this video, you will learn a lot about bearing service

GMC PRODUCTS BY DAVE LENZI

2006-06-05T15:37:00.000-07:00

INNOVATIVE PRODUCTS AND ENGINEERING

CUSTOM MADE PARTS FOR YOUR GMC
Dave Lenzi

2285 Montague Road

Davison, MI. 48423

(810) 653-3902

Shown here his copper gaskets for exhaust manifolds.

see his other Products on Bdub's site

Adjustable Drag Link
Copper Exhaust Gaskets
Rebuilt Idler Arm
Rebuilt Relay Lever
Steering Stabilizer
Air Manifold
Remanufactured Knuckle
Remanufactured Hub
Rebuilt Height Control Valve
Height Control Valve Link
Steering Shaft
Steering Shaft Boots

TZE+ BEARING TOOL

2006-05-09T04:37:00.000-07:00

TZE+ BEARING TOOL

NO LONGER AVAILABLE

USER MANUAL
http://www.bdub.net/TZE_Bearing_Tool.pdf

Remember, we should check our front bearings every 25,000 miles or so. If you want to own your personal bearing puller, the is the only one currently in production.

There have been other pullers manufactured over the years.

http://gmcmotorhome.info/front.html#compare

The only way you can get one of the other version pullers is to find one used. They normally stay with the coach and are not available on the market.

BATTERY TRAY - REAR

2006-04-29T06:10:00.000-07:00

Poly Rear Battery Tray

Economy Version

Slides out with ease

does not come with 2x4 to prop up in the extended position

Will not corrode or stick

Duane Simmons

The Battery Tray Vendor

http://www.bdub.net/duanesimmons/index.html

URETHANE CONTROL ARM BUSHINGS

2006-04-28T06:16:00.000-07:00

Steve Ferguson

new signature product

botiemad1@juno.com

The bushings, enough to do all 4 control arms, and the silicone are $70 per kit.

These are very easy to install as you don't have the pleasure of removing the entire old bushing....just the innards. The original sleeve stays in the control arm. I drive them in with a dead-blow hammer, about 4 good whacks. Easy to press in if the arm is off the coach. The only really difficult part is getting the old rubber out of the original sleeve. I pry it out with a screwdriver.

I will also be offering the ball joints for significantly less than what I've had to pay for them in the past

To see more information go here

http://www.bdub.net/ferguson/

FOOTWELL LINER

2006-04-28T05:55:00.000-07:00

Al Chernoff

his signature product for our GMCs

This replacement Foot well liner is sold by
Jim Kanomata
and Jim Bounds

AUTOMATIC STOVE VENT

2006-04-25T04:32:00.000-07:00

Automatic Vent. Opens & Closes with the Stove Vent Switch

This can be ordered from emerystora@mac.com

cost of $85. plus postage.

Specify white or off-white color.

Priority Mail & insurance is presently approx. $8.15 for delivery in USA.

Get Rid of this POS
See the whole thing here

http://homepage.mac.com/emerystora/stovevent/PhotoAlbum1.html

GMC Motorhome Parts and Services Suppliers

2006-04-22T11:43:00.000-07:00

One of our favorite products is Bdubs place, and his list of
GMC Motorhome Parts and Services Suppliers

Len's Dash Light Kit

2006-04-22T11:32:00.001-07:00

This is an easy to install dash light kit that replaces the old fiber optic light kit. Unlike the original cable there is enough wire in my kit to power the dash lights on the right side of the dash that were unlit with the stock cable. At just $28.00 delivered with instructions this new dash lights kit is an easy to fix to our Classic Motorhomes.

Available colors: green, blue, white, red, pink, orange. Here is the web page to see the development of the light kit.

http://www.gmcmhphotos.com/photos/showgallery.php?cat=4375&ppuser=439

here is how you order
http://www.bdub.net/novak/

There is also Eric's dash light label kit
http://www.gmcmhphotos.com/photos/showgallery.php?cat=4422

on Ebay at #4628339801

Order the light kit by e-mail: B52Rule@Adelphia.Net and the labels at gibbonsmailbox@infostations.com.

Eric’s Classic Dash Labels

2006-04-22T08:29:00.000-07:00

These easy to install self-adhesive dash label sets are produced to look like the originals. Suitable for backlighting with Len's EL Wire dash light kit, these opaque white on black labels utilize a high temperature substrate rated to 304F to withstand summer heat without shrinkage, discoloration or fading. The permanent self-adhesive backing makes for easy no-mess installation. At just $10 per 7-piece set, these new dash label sets are an easy way to freshen up your GMC Classic Motorhome dash. Instructions are included.

Order by e-mail: gibbonsmailbox@infostations.com.
Or,
order in conjunction with Len's EL Wire Dash Lighting kit: B52Rule@Adelphia.Net

Here is the web page to see the developmentent of the labels.

http://www.gmcmhphotos.com/gallery/showalbum.php?uuid=wrench&aid=1419

JACK HOOKS

2006-04-19T21:06:00.000-07:00

Now these only work on GMCs'. But several folks make different versions. Go here to see more information on these products
http://www.bdub.net/GMCSupplierLinks.html

and

Go here to see how to use them

http://users.california.com/~eagle/rear.html#hook

RAGUSA Pattern Shop and R.V. Products INC.
For a catalog Call (949) 261- 5898
or FAX your Shopping Cart order to (949) 475-1420
To Place an Order Send E-mail to: RagusaRV

GMC PARTS FROM BERT AND FAY CURTIS
5990 Greenwood HtsKneeland, CA 95549
707-443-8523
curtisunlimited@aol.com

http://www.bdub.net/curtis-unlimited/index.html

Jack Adapter will lift both front rail or rear boggies of GMC motorhome - $53.00 including Shipping & Handling. Contact Bob Rosenberg at
rincon@dmcom.net
or call 607-746-2107
http://www.gmcmhphotos.com/photos/showgallery.php?cat=3312&ppuser=17

Paul Bennett
GMC Motorhome Products
2400 Blossom St.Columbia, SC 29205
803-799-4323
mailto:bennettpz@aol.com?subject=inquiry
http://www.bdub.net/paulbennett/index.html

RAGUSA GMC PARTS

2006-04-18T15:16:00.000-07:00

This is just one of many custom products for the GMC Motorhome. Go to this web page to see them all http://www.ragusarv.com/

The Classic Ragusa Welcome Step
Finally, there is a cast aluminum step to match the contour and beauty of the GMC. Just drill 4 holes to mount easily (4 structural steel bolts included). Designed for strength and durability, this step is hinged so it can be folded up an out of the way when traveling. A ball burnished version with lasting shiny finish is also available.
Size: Step area is 9" X 18"

ELECTRIC WINDSHIELD WIPER KIT

2006-04-18T08:36:00.000-07:00

GMC Motorhome Electric Windshield Wiper Conversion

Ken Henderson - 76 X-Birchaven Americus, GA

Verizon (229)938-2797

----Verizon customers call free----

GMCWiperMan@bellsouth.net

WEB PAGE http://www.gmcwipersetc.com/

DASH LABELS by Richard Sowers

2006-04-18T08:08:00.000-07:00

Richard Sowers is making new dash labels to replace the cracked and light leaking old ones. These are available directly from him or on EBAY. Here are the pictures of the replacement process. http://www.gmcmhphotos.com/gallery/showalbum.php?uuid=rotor&aid=1422
To get a set you can email me at sowersr@nc.rr.com or send a Paypal payment to the same address, They are also on Ebay as a buy it now item #4628339801. They are available now, and will ship within twenty four hours. Richard

Picture by Tom Lins